DIY: FUN FLIP FLOPS

DIY: FUN FLIP FLOPS

 

The Task: Make some fun flip flops

 

The Ingredients: inexpensive flip-flops (Dollar Tree again), water resistant crazy glue, a pair of shoelaces, a plastic wind chime (I know, random, huh? :-)), scissors

  

The Purchase Locations: Dollar Tree



The Cost: Approx $4.00

 

It only took me: about 20 minutes 

How to:

1. Cut the plastic straps off each flip-flop.

 2. Determine how long you want the straps of your sandals. Fold one shoe string in half and push the loop through the top hole in the flip-flop from the top/front of the flip flop through the back/bottom.

 
3. Turn the flip flop over and tie a big knot or two in the looped part of the shoe string. 

 4. Pull the shoe string down as close to the hole as possible, then add a drop or two of water resistant glue to the hole. Pull the ribbon all the way down first, so you don't get a sticky ribbon.

5. Pull the knot down into the hole and tuck it into the hole so the knot is flush to the bottom of the flip flop (This will keep you from constantly feeling like you are stepping on a rock when you walk).

 
 

6. Turn the flip flop back over to the top.  You should now have two shoe string "straps".  Yay! 

 

7. Pull the left shoe string strap through the hole on the left bottom of the flip flop.  Then, pull the right shoe string strap through the hole on the right bottom of the flip flop.   Be sure to leave enough ribbon on top so a foot can fit.  (It may be helpful to try the flip flop on while you pull the straps through for accuracy.) 

 

8. Turn the flop flip over to the bottom. Take the strap on the left and pull it through the hole on the right from back/bottom to front/top. Take the strap on the right and pull it through the hole on the left from back/bottom to front/top.

 

6.  Cut the excess shoe string from the top of the flip flop.

 

7. Add a bit of glue to each hole to secure the straps. 

 

8. Repeat these steps with your second flip flop.

 

9.  Glue any fun treats to the top flip flop strap.  In my case, I found a cute pink and green wind chime.  So, I cut one of the flower charms off of the wind chime and glued it onto my flip flip. 

 

ENJOY!!!

DIY: July 4th Inspired Sandals

DIY: July 4th Sandals

 

 

The Task: Make some cute sandals for the 4th of July 

 

The Ingredients: inexpensive flip-flops (Dollar Tree again), water resistant crazy glue, ribbon, scissors

The Purchase Locations: Dollar Tree

The Cost: Approx. $3.00

It only took me: about 15 minutes

How to:

 

1. Cut the plastic straps off each flip-flop.

 2. Determine how long you want the straps of your sandals. (In hindsight, I wish I had made mine longer so they could wrap around the ankle a few more times.) Cut your ribbon at the desired length.  Fold the ribbon in half and push the loop through the top hole in the flip-flop from the top/front of the flip flop through the back/bottom.

 

3. Turn the flip flop over and tie a big knot or two in the looped part of the ribbon. 

 4. Pull the ribbon down as close to the hole as possible, then add a drop or two of water resistant glue to the hole.  (Be sure to pull the ribbon down first. Otherwise, you'll end up with a sticky ribbon.

 

5. Pull the knot down into the hole and tuck it into the hole so the knot is flush to the bottom of the flip flop (This will keep you from constantly feeling like you are stepping on a rock when you walk).

 

6. Turn the flip flop back over to the top.  You should now have two ribbon "straps".  Yay! 

 

7. Pull the left ribbon strap through the hole on the left bottom of the flip flop.  Then, pull the right ribbon strap through the hole on the right bottom of the flip flop.   Be sure to leave enough ribbon on top so your foot can fit.  (It may be helpful to try the flip flop on while you pull the straps through for accuracy.)

 

8. Turn the flop flip over to the bottom. Take the strap on the left and pull it through the hole on the right from back/bottom to front/top. Take the strap on the right and pull it through the hole on the left from back/bottom to front/top.

 

6. Add a bit of glue to each hole to secure the straps. 

 

7. Repeat these steps with your second flip flop.

 

ENJOY!!

 

Special Thanks to my model: Melissa D. :-)

DIY: Creepy Crawler Flip Flops

DIY: Creepy Crawler Flip Flops...for the little guys (and reptile loving little girls) in your life

 

 You can pretty much glue anything to the straps of a flip flop to turn them into something special.  You just need the right type of glue. I found this out the hard way with this project.

 PERSONAL SIDE NOTE: It was a little uncomfortable making these flip flops because anyone who knows me knows I am NOT a fan of lizards - not real ones, not cartoon ones, not plastic ones, not even pictures of lizards.  I had a bad experience with a lizard when I was a child.  And, we have been on the outs ever since.  They run too fast. They always end up in the wrong places, i.e. on your body somewhere.  And, there is something completely unsettling about a creature whose tail can snap off from their body and keep wiggling around minutes after detachment.  It got so bad I saw a therapist to help get over my fear.  It worked.  And, I can now see a lizard without having a full blown sweaty meltdown.  But, I hadn't tested actually holding a lizard (even a fake one) until this project.  Mission accomplished...but not without some moments of shoulder shuddering and "Ewww" outbursts from yours truly. 

The Task: 

 My bestie's son LOVES lizards.  She tells me all the time about his backyard "lizard hunting" adventures with his dad.  So far, he's been unsuccessful in his quests.  But, he hasn't given up.  I wanted to make some flip flops for kids and ran into a pack of plastic reptiles.  I immediately thought of my little lizard hunter and decided to make him a pair of flip flops for the summer.

The Ingredients: inexpensive flip-flops (Dollar Tree again), water resistant crazy glue (VERY IMPORTANT if  you want your plastic creatures to stay put), some binder clips, rubbing alcohol

The Purchase Locations: Dollar Tree

The Cost: Approx. $3.00

It only took me: about 30 minutes (only because me and the glue were not getting along) PLUS a 24 hour drying time

How to:
1. Wipe off the plastic straps of your flip flops with alcohol. 

2. Decide the layout you want for your reptiles.

3. Add a few drops of water resistant glue to the plastic flip flop strap and to the bottom of your selected reptile.  Place the sticky reptile on the strap.  Use a binder clip to hold the reptile in place for 24-hours.

4. Repeat until your flip-flops are full of creepy crawly reptiles.

 

5. Let the flip-fops dry for 24 hours.   

 

6. Remove the plastic binder clips after about 12 hours (just to make sure they don't get permanently glued to the flip-flop)

 Enjoy!!!  

 

TIP 1: You really can glue anything to the flip flip strap.  Just make sure it is not too heavy or bulky so the wearer will be comfortable.

 

TIP 2: My trusty E6000 glue failed me this time.  The reptiles did stick to the straps but they could be easily peeled off.  I know little boys and I know they like to take things apart.  I didn't want to make it too easy so I opted for a stronger glue.  Plus, I figured the flip flops are bound to get wet so water resistant glue would be a good choice.  It was.  I didn't get it right until my third gluing attempt.  The second attempt, I tried regular super glue.  Terrible idea.  If you ever want two pieces of plastic to NOT stick together, use regular super glue. 

 

DIY: Studded Flip-Flips

DIY: Studded Flip-Flops!!

Summer is coming! Summer is coming!  So, this month I will be featuring a variety of DIY Flip-Flops.  

The Task:  Flippie floppies don't need to be boring OR expensive.  So, grab a pair and spice them up a bit.

The Ingredients: inexpensive flip-flops (got mine from the Dollar Tree), studs, E6000 glue

The Purchase Locations: Dollar Tree, downtown LA rhinestone shop for studs and glue, rubbing alcohol

The Cost: Approx. $3.00

It only took me: about 10 minutes

How to:
1. Wipe off the plastic straps of your flip flops with alcohol.  I do this so the glue will stick better.

2. Decide what pattern you want for your studs.  I just lined them up about 1/4 inch apart from each other.

3. Add a drop of E6000 to the back of one of your studs and place it on the plastic flip flop strap.

4. Repeat until your flip-flops are full of studs and fabulous.

Enjoy!!!

NOTE: I made a pair with raised "bullet" studs.  The studs started to fall off after I wore them a few times.  (I'll post these soon) So, I suggest flatter studs.