DIY: July 4th Inspired Sandals

DIY: July 4th Sandals

 

 

The Task: Make some cute sandals for the 4th of July 

 

The Ingredients: inexpensive flip-flops (Dollar Tree again), water resistant crazy glue, ribbon, scissors

The Purchase Locations: Dollar Tree

The Cost: Approx. $3.00

It only took me: about 15 minutes

How to:

 

1. Cut the plastic straps off each flip-flop.

 2. Determine how long you want the straps of your sandals. (In hindsight, I wish I had made mine longer so they could wrap around the ankle a few more times.) Cut your ribbon at the desired length.  Fold the ribbon in half and push the loop through the top hole in the flip-flop from the top/front of the flip flop through the back/bottom.

 

3. Turn the flip flop over and tie a big knot or two in the looped part of the ribbon. 

 4. Pull the ribbon down as close to the hole as possible, then add a drop or two of water resistant glue to the hole.  (Be sure to pull the ribbon down first. Otherwise, you'll end up with a sticky ribbon.

 

5. Pull the knot down into the hole and tuck it into the hole so the knot is flush to the bottom of the flip flop (This will keep you from constantly feeling like you are stepping on a rock when you walk).

 

6. Turn the flip flop back over to the top.  You should now have two ribbon "straps".  Yay! 

 

7. Pull the left ribbon strap through the hole on the left bottom of the flip flop.  Then, pull the right ribbon strap through the hole on the right bottom of the flip flop.   Be sure to leave enough ribbon on top so your foot can fit.  (It may be helpful to try the flip flop on while you pull the straps through for accuracy.)

 

8. Turn the flop flip over to the bottom. Take the strap on the left and pull it through the hole on the right from back/bottom to front/top. Take the strap on the right and pull it through the hole on the left from back/bottom to front/top.

 

6. Add a bit of glue to each hole to secure the straps. 

 

7. Repeat these steps with your second flip flop.

 

ENJOY!!

 

Special Thanks to my model: Melissa D. :-)